Panasonic Z95A OLED Calibration Settings

We used the following calibration settings to review the 65-inch (65Z95AP) Panasonic Z95A OLED, which is the only size available. These settings should apply to most types of content, except for gaming or use as a PC monitor, which require a few additional changes, listed below.

These settings are meant to provide a starting point; they're not meant to be copied 1:1. They provide the most accurate image, but you should adjust them to match your preferences and viewing conditions.

For SDR content, you can choose a few different preset picture modes. We used the 'Professional 1' Picture Mode because it's the most accurate out of the box and allows for the most customization. A Luminance Level setting of '51' corresponds to about 200 nits on our unit, which is our target for a moderately lit room, but you should adjust this setting to your specific viewing conditions.

From the Advanced Settings menu, we left Contrast at '90,' Color at '50,' Tint at '0,' and set Gamma to '2.2.' We also set the Color Temperature to 'Warm 2' and Sharpness at '0,' which is different than the sharpness setting of '30' we used for our upscaling test. We also set Peak Luminance to 'High.'

We disabled Color Remaster, Random Noise Reduction, Block Noise Reduction, Resolution Remaster, and Gradation Smoothing, as we leave all advanced processing disabled for the most natural image possible. These features can help reduce banding and noise in some content, but they aren't very effective.

HDR is automatically enabled for native apps. When you start playing HDR content, a small HDR icon appears in the picture settings menu. Once you start playing HDR content, some of the settings change automatically. We recommend choosing the 'Professional 1' Picture Mode, setting the Color Temperature to 'Warm 2' and Color Remaster to 'Off,' and leaving the other settings to their defaults in HDR.

The TV supports Dolby Vision and HDR10+ from native apps and external devices. As with normal HDR content, when you start playing Dolby Vision or HDR10+ content, some settings change automatically. We recommend leaving these settings as-is; don't copy the SDR settings over.

The following are the results of calibrating the white balance of our unit to 6500K in HDR. They are provided for reference and shouldn't be copied as the calibration values vary per individual unit, even for the same model and same size as the TV we reviewed, due to manufacturing tolerances. If you want to try them, you'll need to enter all values shown, as all of them are active at the same time. If you end up with worse picture quality, simply reset them to the default values.

Although we disable most motion-enhancing functions for most of our tests, you should adjust these to whatever looks best for you. Some settings may need to be adjusted depending on the specific content you are watching.

Although we usually leave these settings disabled during most of our testing, you should adjust the settings in the Advanced Settings menu to your liking, as different people prefer different levels of motion interpolation. If you want to enable motion interpolation, set Intelligent Frame Creation to 'Custom' and adjust the 'Blur Reduction' and 'Film Smooth' sliders to taste.

The Panasonic Z95A automatically removes judder from 24p sources, like a Blu-ray player or an external streaming device with a 'Match Frame Rate' feature. For 60 p/i signals, like a cable box, you have to set Accurate IFC to 'On.'

From the base SDR and HDR settings, very few changes are required for the best gaming experience. When you start gaming, it is best to switch to the 'True Game' Picture mode to get the lowest input lag and use the recommended settings for SDR or HDR. This TV supports a variable refresh rate. As long as you're in 'True Game' mode, it's automatically enabled.

To get proper chroma 4:4:4 when gaming on a PC, enable the 'Pure Direct' setting in the HDMI Settings.

The TV supports eARC. For it to work, set eARC to 'On,' with the Digital Audio Format to either 'Passthrough' or 'Auto.' These settings are found in the Display & Sounds section.

This TV has about 9.5 GB of accessible internal storage, of which about half is used with the default apps installed. These settings are valid for the unit we bought and tested, and it was calibrated on version 8.1.1.2.